Ready for the next spearfishing stage? Then, look after your gun! Clean it and give it the proper care. Master the basics of maintenance to get the most out of your dives. Enjoy success with your spearfishing!
Disassembling the Spearfishing Gun
Disassembling and cleaning your spearfishing gun is essential for proper maintenance. So, Beuchat specialists suggest doing it regularly. Here are the steps:
- Pre-cleaning: Rinse it with fresh water and dry it with a soft cloth. Check for cuts, tears, rust or mechanical part defects.
- Disassemble: Check the user’s manual. Most guns will have four main parts: speargun, power bands, wishbone, and tip of the spear. Inspect and clean each carefully. Wood spearguns need extra care to avoid water intrusion.
- Cleaning: Use suitable cleaning agents for each part. Lubricate or use penetrating oils. Use PH neutral shower gel, Talc, and a toothbrush to clean neoprene. Rinse your spearfishing suit inside and out in freshwater.
- Drying: Rinse all parts and hang them in a micro-organism free support. Avoid direct sun.
- Reassemble: Check for smoothness, flexibility, and water-tightness. Fit the parts securely.
- Long-term storage: Store it in a dry place, away from sun exposure. Protect it against deterioration. Use surface penetrating epoxy coatings or ultra-clarified epoxy encased-in-glass.
By following these steps, you can ensure your spearfishing gear remains safe and in top condition.
Cleaning the Barrel and Other Components
Ensure your spearfishing equipment’s performance, safety, and longevity with proper cleaning and care. Start by disassembling each component to assess for damage or imperfections.
Remove the foot pockets, blades, and other detachable parts of your fins. Clean them with a suitable detergent to remove dirt, sand, or micro-organisms. Rinse with tepid water; pay special attention to the zips and other mechanical parts that require lubrication. Use neoprene repair glue if there are tears or holes on your gloves, hoods, boots, or masks.
Now to the spearfishing gun: remove the catch, then disassemble the barrel. Scrub with a plastic/rubber solution to get rid of any encrusted dirt or saltwater residue. Check the barrel’s porosity, elasticity of the elastics, and the strength of the springs. For wooden spearguns, use teak oil with resin and hardener to restore their encased-in-glass appearance. Sand off any imperfections.
Dry each component thoroughly with a clean cloth. Store in a suitable support, taking care not to leave any moisture inside. Your spearfishing equipment is now ready for your next dive!
Reassembling the Gun
When it comes to caring for your speargun, proper maintenance is key. Reassembling it is essential. Here are some steps for safely and comfortably reassembling your speargun:
- Make sure all components are clean and dry. This includes the barrel, spear, rubber bands, and any other removable parts.
- Lubricate the firing mechanism with a waterproof lubricating agent. This will help prevent cold-related injuries.
- Check the barb mechanism and sand it if needed. This will make it easier to load and fire.
- Reassemble the gun. Put the spear back in the barrel and attach the rubber bands. Secure the elastomer foot pockets.
- Store in a safe marine environment, like a basin or bathtub. Avoid machine washing or spin drying. Check for damage or wear on the spear and the other elements. This will help keep your speargun in good shape and reduce the risk of underwater injury.
Image credits: spearfishinglog.com by Adam Duncun
Storing Your Spearfishing Gun: Techniques and Tips
Storing your spearfishing gun is key for caring for your gear. Here are some tips to help you do just that:
- Check for water tightness after each dive. Look for cracks or leaks, which could cause rust or corrosion from seawater.
- Inspect your gun for damage after diving through underwater rock formations. Repair any cracks or scratches on its body.
- If you spearfish in areas with plants, clean the gun parts with a soft-bristled brush and mild soap. Rinse the parts off with freshwater.
- Parts made from carbon, fibreglass, polyamide or polypropylene may need inspecting for cracks. Avoid exposing them to high temperatures to prevent deformation.
- Sand the gun’s surface to remove small scratches and maintain a sleek finish.
- Hang your spearfishing gun in a dark, cool place to keep it safe and secure.
Cleaning and maintenance of your gun can help you have successful spearfishing trips, and extend its lifespan.
Final Tips for Gun Care and Maintenance
If you’re serious about spearfishing, look after your gun! Here are the best tips:
- Rinse it with fresh water straight away, especially if you were diving in saltwater.
- Keep it in a cool and dry place, on a hanger or rack – no warping allowed!
- Sand the shaft with fine sandpaper every now and again to get rid of rust and buildup.
- Use only silicone lube on the O-rings.
- Don’t be afraid to ask more experienced divers for advice.
Follow these steps and your gun will be ready for a successful, enjoyable snorkeling or freediving trip.
FAQs about How To Properly Clean And Care For Your Spearfishing Gun
How often should I clean my spearfishing gun?
It is recommended to clean your spearfishing gun after every use to maintain its longevity and prevent damage caused by saltwater and sand.
Can I use sandpaper to clean my spearfishing gun?
No, using sandpaper can cause damage to the gun’s surface and compromise its functionality. Instead, use a non-abrasive cloth or sponge to clean the gun.
What should I use to lubricate my spearfishing gun?
It is recommended to use a silicone lubricant to prevent rust and ensure smooth operation of the gun. Avoid using petroleum-based lubricants as they can damage the gun’s rubber components.
Is it challenging to disassemble and reassemble a spearfishing gun?
Disassembling and reassembling a spearfishing gun can be challenging for beginners. However, with proper instruction and practice, it can become an easy and routine maintenance procedure.
How do I store my spearfishing gun properly?
After cleaning and drying, store your spearfishing gun in a cool, dry place away from direct sunlight. Avoid storing it in a humid or damp environment as this can lead to corrosion and damage to the gun’s components.
What should I do if my spearfishing gun is not functioning properly?
If your spearfishing gun is not functioning correctly, it is essential to perform a thorough cleaning and inspection of all components. If this does not fix the issue, contact a professional for repair or replacement.
Jump to Section
- 1 Key Takeaway:
- 2 Disassembling the Spearfishing Gun
- 3 Cleaning the Barrel and Other Components
- 4 Reassembling the Gun
- 5 Storing Your Spearfishing Gun: Techniques and Tips
- 6 Final Tips for Gun Care and Maintenance
- 7 5 Well-Known Facts About How to Properly Clean and Care for Your Spearfishing Gun:
- 8 FAQs about How To Properly Clean And Care For Your Spearfishing Gun
- 8.1 How often should I clean my spearfishing gun?
- 8.2 Can I use sandpaper to clean my spearfishing gun?
- 8.3 What should I use to lubricate my spearfishing gun?
- 8.4 Is it challenging to disassemble and reassemble a spearfishing gun?
- 8.5 How do I store my spearfishing gun properly?
- 8.6 What should I do if my spearfishing gun is not functioning properly?