Skip to content

How To Properly Clean And Care For Your Spearfishing Reel

Key Takeaway:

  • Regular cleaning and maintenance of your spearfishing reel is important to ensure that it functions properly and lasts longer. It also helps prevent corrosion and prolongs the life of the reel.
  • After each use, rinse the reel with fresh water to remove any salt, sand or debris. Disassemble the reel, clean each part with a soft brush or cloth, and lubricate some of the parts using reel oil or grease as recommended by the manufacturer.
  • To avoid damage to the reel, store it in a cool, dry place and cover it with a reel cover. Avoid dropping or exposing the reel to extreme temperatures, sunlight or abrasive surfaces. Always refer to the manufacturer’s instructions for complete maintenance and cleaning instructions.

Searching for the ideal way to sustain your spearfishing reel? You’re fortunate! Here are the must-have tips for scrubbing and tending to your reel. This will guarantee your reel lasts for many years!

Pre-Cleaning Preparation

Proper cleaning and maintenance of your spearfishing reel is crucial for ensuring its longevity and performance. In this section, we will discuss the essential steps for pre-cleaning preparation to get your reel ready for a thorough cleaning.

We’ll begin by outlining the supplies you’ll need and why each item is important. Then, we’ll move onto the steps of disassembling your reel and what to look out for during this process. Understanding the importance of pre-cleaning preparation can help you avoid costly mistakes and keep your spearfishing reel in top condition.

Gather Supplies

Before cleaning and caring for your spearfishing reel, you need some supplies and equipment. Get a cleaning rod and reel, fishing equipment, Simple Green Marine All-Purpose Boat Cleaner, a toothbrush, lubricating protectant, grease, oil, WD40, and a soft towel.

Handle delicate parts with care. These include the drag system, spool, main shaft, handle knobs, line rollers, bail arm springs, rod guides, gears, and bearings.

For effective cleaning and care:

  1. Disassemble the reel. Check for corrosion and damage to guides.
  2. Use freshwater, Simple Green Marine All-Purpose Boat Cleaner, a toothbrush, and a soft towel.
  3. Rinse and dry with a soft towel.
  4. Lubricate external and internal parts per manufacturer instructions.
  5. Reassemble and lubricate each part.
  6. Test the line and guides by running the line through them.
  7. Service or strip down for deep cleaning if you go saltwater fishing often.

Pro tip: Clean and lubricate after every use, especially after saltwater fishing, to extend longevity and functionality.

Disassemble Reel

Before you clean your spearfishing reel, you must disassemble it first. This has two benefits: cleaning is easier and you can check the internal parts for wear or damage. Here is a step-by-step guide:

  1. Gather tools: screwdriver, pliers and lubricant.
  2. Take apart the reel: side plate, handle, spool, and other easy-to-remove external parts.
  3. Check line and guides: inspect line for damage, remove stuck particles.
  4. Check ball bearings: remove, inspect for damage, lubricate.
  5. Scrub parts: use a gentle scrubber with fresh water to wash internal and external parts. Remove dirt or debris.
  6. Lubricate parts: apply lubricant to all moving parts, including ball bearings, gears and spool.
  7. Reassemble the reel: put back in reverse order from disassembly.

Disassembling and cleaning your reel properly will help you get the most out of it and keep it functioning for your next underwater adventure. For optimal working condition, professionals recommend periodic maintenance and cleaning services.

Cleaning the Reel

Cleaning and maintenance are essential in ensuring the longevity and optimal performance of your spearfishing reel. In this section, we’ll focus on the art of cleaning the reel, an often-overlooked yet crucial aspect of upkeep. We’ll provide step-by-step instructions on how to clean the spool and drag system, two integral components of the reel. Properly cleaning these parts will help prevent corrosion and deterioration, allowing for a smoother and more efficient spearfishing experience.

Clean the Spool

Giving your spearing reel some TLC can help its longevity and performance. Cleaning is key. Here’s how:

  1. Take it apart
    Start by separating the reel into its basic components. You can check for any damage.
  2. Check the guides
    Examine the guides for any harm from use.
  3. Cleaning time
    Mix warm water and soap, then use a soft-bristled brush to clean away dirt, saltwater and other stuff.
  4. Lubricate
    After it’s clean, lubricate all moving parts. Lubrication helps prevent corrosion.
  5. Routine maintenance
    Freshwater cleaning is needed after every use, but periodic maintenance is too. Reels should be serviced every six months, depending on usage.

By following these steps, you’ll keep your reel in top condition and protect it from saltwater and other contaminants.

Clean the Drag System

It’s essential to frequently clean your spearfishing reel. A well-maintained reel works efficiently, protects against corrosion, and boosts performance. Here’s a guide on how to clean the drag system:

  1. Disassemble the reel. Take off the spool, line, and handle. Look for any damage and fix it.
  2. Clean the reel. Use mild detergent and warm water to clean all parts. Use a soft-bristled brush for hard-to-reach areas. Rinse with water and let dry fully before reassembly.
  3. Clean the drag system. This is the most important component. Dirt, grease, and debris can build up on the drag washer. To clean the drag system:
    1. Remove the spool.
    2. Take off the drag stack or drag washer and clean each part, including felt and metal washers. Use warm water and mild detergent.
    3. Regrease the felt washers when they’re clean.
  4. Lubricate the reel. Apply a light coat of oil or lubricant after cleaning to secure different parts and guarantee smooth movement.
  5. Reassemble the reel. String it. Routine upkeep like oiling the handle and spool ensure optimal performance.

By following these steps, you’ll keep your reel ready for your next spearfishing trip. Pro tip: Do regular maintenance to keep dirt and rust away and make your reel last longer.

Lubricating the Reel

Lubricating your spearfishing reel is crucial for its longevity and optimal performance. In this section, we will provide you with a clear understanding of how to effectively lubricate your reel. You will learn how to choose the right lubricant for your specific reel and how to apply it correctly to individual components. We will discuss the benefits of proper lubrication, such as fewer parts’ wear, smoother reel operation, and increased casting distance. With these tips, you can keep your spearfishing reel in top condition and get the most out of your spearfishing experiences.

Lubricating the Reel-How to Properly Clean and Care for Your Spearfishing Reel,

Image credits: by Harry Woodhock

Select Appropriate Lubricant

Choosing the right lubricant for your spearfishing reel is essential to avoid harm to the guides when casting and keep your reel running perfectly. Here are some tips to help you select the ideal lubricant:

  • Take apart the reel and inspect the guides for any damage, before you apply the lube.
  • Use a lubricant designed for saltwater use or with anti-corrosive qualities.
  • Avoid oils or greases that collect debris or dirt. Instead, use a lube made for reels, and use it for regular maintenance.
  • Apply a light layer of lubricant to moving parts, bearings, fittings, and other parts needing lubrication.
  • Use a clean cloth or cotton swab to wipe off extra lubricant.

It’s important to properly clean and lubricate your reel to extend its life. We suggest servicing and lubricating your reel after every fishing trip, or at least once a month, no matter how much you use it.

Apply Lubricant to Reel Parts

Lubricating your reel parts is essential. Over time, dirt and salt can accumulate, decreasing its performance and damaging guides. To avoid this, strip down the reel every few months and give it a deep clean. Here’s how:

  1. Remove the spool, handles, and seat.
  2. Clean with warm soapy water, a toothbrush, or soft sponge.
  3. Check for any broken or rusted parts. Replace them immediately.
  4. Lubricate gears, shafts, bearings, and other moving parts with a suitable lubricant.

A survey showed that proper lubrication extends the life of your reel. Apply the correct lubricant and don’t over-apply as excess oil can attract dirt. Do regular maintenance to keep your fishing reel lasting longer.

Reassembling the Reel

Now that you’ve properly disassembled and cleaned your spearfishing reel, it’s time to put it back together. However, reassembling a reel can be tricky and mistakes can cause malfunctions on your next trip. In this section, we’ll be discussing the steps to reassemble your spearfishing reel. We’ll be breaking down the process into three sub-sections:

  1. How to align the parts
  2. How to reattach the screws or clips
  3. Finally, how to test the reel to make sure it’s properly working.

By following these steps, you can confidently and safely reassemble your reel, and get back to what matters most- spearfishing.

Align Parts

When putting your reel back together, it’s vital to have all the parts lined up correctly for it to work well when spearfishing. It’s also recommended to check regularly and clean your reel after every saltwater use.

Here are the steps:

  1. Check the reel and parts for any wear or damage.
  2. Look closely at the guides to stop your fishing line from getting damaged.
  3. Take the reel apart and clean each part.
  4. Rebuild it, starting with the spool and making sure everything is in the right place.
  5. Test it to make sure it’s running well.

Doing this will keep your reel going longer and work more efficiently when you’re spearfishing.

Reattach Screws or Clips

Cleaning your spearfishing reel is essential! If not done, you could lose or break parts and it won’t work properly. Start by disassembling the reel and cleaning each part. Check for any worn out parts that need replacing. Clean the reel with fresh water and let it dry. Reattach all screws and clips in the original position.

For extra care, clean your reel every time it’s used in saltwater and do a deep clean twice a year. Proper maintenance and cleaning will make it last longer and work better.

Pro tip: Cleaning and maintaining your reel can make it last longer and work better!

Test Reel

Heading out on a spearfishing adventure? Don’t forget to maintain your reel! Here are some tips to reassemble it:

  • Use the right tools to remove parts. Be gentle – don’t damage the guides.
  • Clean it with mild detergent and warm water. Remove saltwater with baking soda.
  • Check line guides for wear or damage. Replace if needed.
  • Reassemble the reel, checking for any malfunctioning parts.
  • Lubricate moving parts with specialized lubricants – especially if in saltwater.

Properly maintain and clean your reel to extend its lifespan. Avoid costly repairs or corrosion damage.

Proper Storage and Maintenance

Proper storage and maintenance of your spearfishing reel is crucial for its longevity and functionality. In this section, we will cover three important sub-sections to ensure your spearfishing reel remains in top condition:

  1. How to rinse your reel after use: It is important to rinse your reel thoroughly after every use with fresh water to remove any salt or debris that may have accumulated on it. This will prevent corrosion and damage to your reel’s internal components.
  2. How to store your reel in a dry place: After rinsing your reel, make sure to dry it completely before storing it in a dry place. This will prevent rusting and other damage caused by moisture.
  3. The importance of performing regular maintenance on your reel: Regular maintenance, such as lubricating the moving parts and inspecting the reel for damage, is essential for keeping your spearfishing reel in good working condition. It is recommended to perform this maintenance at least once a year, or more frequently if you use your reel frequently or in harsh conditions.

By following these simple guidelines, you can prevent damage to your reel and enjoy successful fishing trips for years to come.

Rinse After Use

Caring for your spearfishing reel is key. Fresh water cleanings after each use are essential, since saltwater can corrode the metal components.

Follow these steps for the best results:

  • Disassemble: Take apart the spool, handle and body.
  • Clean: Use fresh water and mild soap. Avoid submerging and use a damp cloth or soft-bristled brush.
  • Dry: Towel dry or use an air compressor. Dry all components, including the guides and hardware, to prevent rust.
  • Check guides: Inspect for any damages or wear and tear.
  • Maintenance: Apply a reel lubricant or oil every few months.

By following these steps, your spearfishing reel will be in top condition for many successful fishing trips!

Store in a Dry Place

Storing your spearfishing reel correctly is essential for its upkeep. Saltwater can harm the reel’s guides and other parts if not taken care of often. To make sure it works properly, it needs regular cleaning and maintenance. Here are some helpful tips to store it correctly in a dry place:

  • After each use, take it apart and clean it with a soft cloth and mild detergent. Use a toothbrush for small crevices and hard-to-reach areas.
  • Dry it with a clean cloth and leave to air-dry completely.
  • Reassemble and lubricate the moving parts with reel oil.
  • Store the reel away from direct sunlight and moisture. For long-term storage, strip it down and store the components separately in a dry spot.
  • Inspect it regularly for damage, like stripped screws or damaged guides. Repair any damaged parts before using it again to stop more damage.

By following these steps, you can keep your spearfishing reel in top shape for many seasons.

Perform Regular Maintenance

Regular maintenance is key for optimal performance and a longer life of your spearfishing reel. Clean it after each use, especially if in salt water, using a soft cloth to wipe away salt and debris.

Strip it down every so often to check for damage or wear and tear. Look at the gears, drag washers, and screws for signs of corrosion or damage to prevent further issues. Parts can be bought if needed.

Lubricate with a high-quality lubricant after cleaning and inspecting. Avoid harsh chemicals or abrasives as they can cause damage. Store it in a dry place away from direct sunlight and extreme temperatures.

By doing regular maintenance, cleaning, and inspections, you can keep your spearfishing reel functioning and lasting for years.

Some Facts About How To Properly Clean and Care for Your Spearfishing Reel:

  • ✅ Always rinse your spearfishing reel with fresh water after each use to prevent corrosion and damage. (Source: Spearfishing World)
  • ✅ Check the manufacturer’s instructions for specific cleaning and maintenance guidelines for your reel model. (Source: Sport Diver)
  • ✅ Regularly lubricate the moving parts of your reel with a silicone-based lubricant to keep it functioning smoothly. (Source: Scuba Diving)
  • ✅ Store your spearfishing reel in a dry, cool place to prevent moisture damage and rust. (Source: Spearfishing Reviews)
  • ✅ Inspect your reel for any signs of wear or damage before each use to ensure safety and optimal performance. (Source: Bluewater Hunter)

FAQs about How To Properly Clean And Care For Your Spearfishing Reel

How important is it to regularly clean my spearfishing reel?

Regularly cleaning your spearfishing reel is crucial to ensure its longevity and performance. Dirt and saltwater can cause corrosion and damage to the reel’s components, leading to malfunctions and reduced efficiency.

What is the best method to clean my spearfishing reel?

The best way to clean your spearfishing reel is to use a mild soap solution and a soft brush to remove any dirt or debris. After cleaning, rinse the reel in clean water and dry it thoroughly.

How often should I perform periodical maintenance on my spearfishing reel?

It is recommended to perform periodical maintenance on your spearfishing reel every 12-18 months, depending on the frequency of your use. Regular maintenance helps to keep your reel in top condition and prevents any issues from arising.

What is involved in a stripped down clean of my spearfishing reel?

A stripped down clean of your spearfishing reel involves completely disassembling the reel and cleaning each individual part thoroughly. This type of clean is typically performed every 2-3 years, and it is recommended to consult the manufacturer’s instructions or seek advice from a professional before attempting a stripped down clean.

Can I use any type of cleaning solution on my spearfishing reel?

No, it is important to use a mild soap solution when cleaning your spearfishing reel. Avoid using harsh chemicals or abrasive materials that can cause damage to the reel’s components.

What should I do if I notice any issues with my spearfishing reel after cleaning?

If you experience any problems or malfunctions with your spearfishing reel after cleaning, discontinue use and seek the advice of a professional. Attempting to fix the issue yourself may cause further damage and result in costly repairs.