Skip to content

Polespear Maintenance: Tips For Keeping Your Gear In Top Shape

Key Takeaway:

  • Regular cleaning and maintenance of your polespear is essential to ensure its longevity and reliability. Make sure to rinse it thoroughly with fresh water after each use, and inspect it for any damage or signs of wear and tear.
  • When storing your polespear, keep it in a cool, dry place, and avoid leaving it in direct sunlight or extreme temperatures. You can also use a protective cover or sock to keep it safe from scratches and other damage.
  • Investing in high-quality gear, such as stainless steel polespears and durable bands, can also help to prolong the lifespan of your equipment and improve your overall diving experience.

Want to keep your pole spear in great shape? Don’t fret – here are some simple ideas to help. They will ensure your gear stays in tip-top condition and avoid any breakdowns. Enjoy your spear like it’s brand new!


To ensure your polespear stays in top form, maintenance is key. The inspection process is one of the most important steps in keeping your gear functioning properly. In this section, we’ll discuss the proper techniques for inspecting your polespear. We’ll cover checking for bends or cracks, as well as examining for any rust or corrosion. By following these tips, you can identify and address any potential issues before they become a problem during your next dive.

Additionally, we’ll explore an expansion on the inspection process to ensure your polespear is always in the best possible condition.

Check for bends or cracks

When it comes to pole spear maintenance, check for bends or cracks in the shaft and point. Regular upkeep is key for underwater hunting. Here are tips from Beuchat specialists for optimal condition:

  • Spearfishing suit: Check the neoprene for water-tightness and smoothness. Rinse with fresh water after each use. Hang to dry, use PH neutral shower gel and talc to prevent tearing. Protect from cold and injuries caused by underwater rocks.
  • Gloves, hoods, boots, masks, and snorkel: Rinse with fresh water after each use. Air dry. Store in a dry and protected place.
  • Spearfishing fins: Check propulsion system of Mundial fins. Clean with specific detergent and use rubber solution to fix porosity, cuts, or tears. Lubricate mechanical parts with silicone grease.
  • Speargun: Disassemble and check integrity of barrel, power bands, wishbone, catch, barb and mobile parts. Clean and grease mechanical parts. Use rubber solution on porosity, cuts, and tears. Check power bands for stress corrosion cracking. Lubricate roller spears and check bearings. Store replacement parts and injector rod for preventative maintenance.
  • Pole spear: Practice shots on structures and hiding sites to aim correctly. Cock the spear carefully before releasing it. Secure the catch firmly before retrieval.

Pro Tip: Follow pre-season checklist and take good care of spearfishing equipment. This helps prevent downtime and costly repairs.

Check for rust or corrosion

Maintaining your polespear in optimal condition is super important. Saltwater, humidity and underwater rock formations can cause rust and weaken your polespear, making it more likely to break and become irreparable. To keep your polespear in tip-top shape, do the following:

  1. Look for rust and corrosion around blades and hangers.
  2. Check for water tightness.
  3. Clean the different parts with fresh water.
  4. Lubricate using a suitable agent.
  5. Inspect elastomer foot pockets, elastics and springs for damage, replace if needed.
  6. Be careful cocking, releasing, securing catch, and finding the kill spot.
  7. Store in a protective case not exposed to sunlight or ozone.
  8. Follow manufacturer instructions for carbon, fibreglass, or other polespear materials.
  9. Use neoprene repair glue.

Regular inspection, cleaning and maintenance will extend your polespear’s life and provide optimal spearfishing and freediving experiences.


To keep your polespear operating efficiently and functioning well, regular cleaning is a crucial task. In this section, we would discuss the crucial steps involved to clean the shaft of the polespear, the fundamental part of a polespear. By keeping the shaft free from grime, rust or dirt, it can prolong the lifespan, increase performance and produce better results while using the polespear. We will further expand on the cleaning process, including the materials required, the time required, and how frequently cleaning should be performed.

Cleaning the shaft

Cleaning your polespear is key for long-term reliability. Dismantle it into its parts and clean each one separately. This includes the injector rods. Here are some tips to consider:

  1. If made of polyamide or polypropylene, use soap and warm water.
  2. For deeper cleaning, use a lubricating agent in a basin or bathtub.
  3. Don’t use abrasive or corrosive substances on the latex rubber.
  4. Store it in a cool, dry place when not being used.

Also, check and lubricate the cocking and releasing mechanisms regularly. Verify they work properly before each dive. In conclusion, maintenance will extend the lifespan and improve functionality.

Maintenance of Bands

Maintaining your polespear is crucial to ensure optimal performance and longevity of the equipment. In this section, we’ll dive into the maintenance of bands, which are an essential component of your polespear. From lubricating your bands to replacing worn out ones, we’ll explore the tips and techniques to keep your bands in top shape. Additionally, we’ll examine the role of clean water and proper storage in preserving the quality of your bands over time.

Maintenance of Bands -Polespear Maintenance: Tips for Keeping Your Gear in Top Shape,

Image credits: by David Washington

Lubricate bands

To keep your polespear’s bands in good condition, it’s important to lubricate them regularly. This is especially true if you use your polespear a lot in a marine environment, since UV rays can cause damage. Here’s how to lubricate your bands:

  1. Take apart the polespear and remove the bands from the notches.
  2. Check for particles or debris that might be on the bands or in the notches. Clean with a soft brush or cloth and mild soap if needed.
  3. Make sure the bands are dry before you apply any lubricant.
  4. Put a small amount of silicone lubricant onto the bands and rub it in gently with a soft cloth. Don’t use petroleum-based products, as they can harm the rubber.
  5. Put the bands back onto the polespear by cocking the spear and releasing the spear point into the notches after lubrication.
  6. Store your polespear in a cool, dry place, away from UV exposure and stretching the bands for too long.

Remember, maintaining your polespear’s bands prevents damage and helps it last longer so you can enjoy lots of dives without worry.

Replace worn out bands

Replacing worn-out bands on a polespear is a must. To make sure it’s always in the best shape, you must identify when they need replacing. Here is how:

  1. Disassemble the polespear by removing the tip and sliding off the old bands.
  2. Measure and cut new bands to the right length with scissors or knife.
  3. Slide the new bands onto the polespear and securely attach them to the notches near the tip.
  4. Reassemble the polespear, making sure all parts are fastened and aligned correctly.
  5. Maintain your polespear by cleaning and inspecting it after every use, storing it in a dry and cool spot, and replacing any worn or damaged parts.

By doing this, you can make sure your polespear is always in top condition for successful fishing.

Maintenance of Polespear Tips

As avid polespear fishermen, it’s essential to keep our gear in top shape to ensure our safety and the sustainability of our nature. In this section, we’ll explore some tips and tricks for maintaining the tips of your polespear, the most crucial part of the gear.

We will touch on two main sub-sections:

  1. Sharpening the tip, which discusses ways to keep the tips razor-sharp and keen.
  2. Replacing worn-out tips, which offers solutions on how to replace damaged or old tips to keep your polespear in optimal condition.

With these tips, you’ll be able to prolong the life of your gear and make the most of your next spearfishing trip.

Sharpening the tip

Sharpening the tip is a must for optimal polespear performance. To do this, first remove any accessories, like the paralyzer tip. Then use a sharpening stone or fine-grit sandpaper in a circular motion. Rinse the tip with freshwater and dry it.

Regular maintenance is key. Inspect it for damage, rust, or bending. If needed, seek help from a professional.

By following these maintenance techniques, you can be sure your polespear is reliable and efficient for your next underwater adventure.

Replace worn out tip

To keep your polespear performing optimally, look after its tips. Wear and tear can bring down accuracy and performance. An easy solution is to inspect and change worn tips. Here’s how:

  1. Disassemble to expose the tip. It could be secured with a screw, binding or glue.
  2. Check for blunt edges, cracks or bent prongs.
  3. Remove and replace with a new one. Ensure it fits securely.

Routine service is key. Clean after use, store in a cool and dry place. Have an extra set of tips ready for your spearing trips.

By following these tips, you’ll keep your polespear in top shape and ace each use!


Proper storage is crucial for maintaining the lifespan and performance of your polespear. In this section, we’ll take a closer look at the various considerations for storing your polespear.

We’ll explore the benefits of storing your polespear in a dry place and the best practices for disassembling your gear before storage. Additionally, we’ll discuss why it’s important to avoid storing your polespear under tension, as well as tips for properly releasing tension from your gear before stowing it away. With these storage tips, you can ensure that your polespear stays in top shape for your next underwater adventure.

Storing in a dry place

Store your polespear in a dry place for the best results. After each use, disassemble it. Don’t leave it assembled for too long, or it can damage the rubber bands and weaken its parts. Rinse the parts to remove salt and sand. Dry them with a clean towel then put them away. Keep it in a dry spot away from sunlight and moisture. Put the polespear and its components in a plastic bag, cardboard tube, or protective case. This way, you can keep it in great shape for your next use. A study by the National Oceanic and Atmospheric Administration showed that following these tips can increase the polespear’s lifespan by up to 50%!

Disassembling for storage

Proper storage of your pole spear is a must! To keep it in top shape, disassemble it before storing. Experts suggest separating the parts and storing them separately. Here’s how:

  • Start by detaching the spear tip and putting it in a protective cover. This will avoid damage or injury.
  • Remove the rubber bands from the pole and detach the spearhead. Place them in different containers or compartments so they don’t tangle.
  • Take apart the pole by separating the sections. Put them in a safe, dry place. Wipe off any dirt or saltwater with a cloth or towel.
  • If metal parts are present, dry them thoroughly. Apply a thin layer of protective oil or grease to prevent rusting or corroding.
  • Keep all the parts organized and in a cool, dry place till you use them again. Avoid extreme temperatures, sunlight, or moisture.

By following these steps, you can keep your pole spear gear clean and rust-free, and always ready for your next spearfishing adventure! Taking care of your gear will increase its lifespan and improve performance and safety in the water.

Avoid storing under tension

Disassemble your polespear to save it from tension and wear. Rinse the spear with clean water after use. Then, towel or air dry it before storing. Find a cool and dry area to store it, like a garage or closet. Use a storage bag to protect it from dust and scratches. Inspect the polespear regularly for any damage. Replace any worn parts immediately. Following these tips will keep your polespear in top condition and make it last longer. This advice is based on experience and knowledge.

Five Facts About Polespear Maintenance: Tips for Keeping Your Gear in Top Shape:

  • ✅ It is recommended to rinse your polespear with freshwater after every use to remove salt buildup and prevent corrosion. (Source: Scuba Diving Magazine)
  • ✅ Coating the metal components of your polespear with a thin layer of petroleum jelly or silicone grease can help protect against rusting. (Source: Spearfishing World)
  • ✅ When storing your polespear, make sure to separate the individual pieces and store them flat to prevent warping or bending. (Source: Divers Direct)
  • ✅ Checking for any signs of wear or damage on your polespear before every use can prevent accidents and extend the lifespan of the gear. (Source: Trident Spearfishing)
  • ✅ Maintaining the rubber sling of your polespear by keeping it out of direct sunlight and stretching it occasionally can help prevent it from becoming brittle and breaking. (Source: Spearboard)

FAQs about Polespear Maintenance: Tips For Keeping Your Gear In Top Shape

What are some basic tips for maintaining my polespear?

Some basic tips for maintaining your polespear include rinsing it off with freshwater after every use, avoiding excessive exposure to sunlight or heat, and storing it in a cool, dry location. Additionally, it’s important to inspect your polespear regularly for any signs of wear, such as cracks or missing pieces, and to replace any damaged components immediately.

How often should I disassemble my polespear for cleaning?

It’s recommended that you disassemble your polespear for thorough cleaning at least every few uses, or as needed based on the frequency and conditions of your use. This involves removing the tip, sling, and bands from the spear and cleaning each component individually, as well as dry-wiping the shaft and handle. Be sure to also inspect your polespear for any signs of damage or wear during the cleaning process.

What types of cleaners should I use to clean my polespear?

You should only use mild, non-abrasive cleaners when cleaning your polespear, as harsh chemicals or abrasive materials can cause damage to the components. A simple solution of warm water and mild dish soap is often sufficient, but specialized sprays or cleaning products may also be available for cleaning specific components of your polespear. Be sure to thoroughly rinse all components with clean water after cleaning.

How should I store my polespear when not in use?

When not in use, it’s important to properly store your polespear to prevent damage and prolong its lifespan. Storing your polespear in a cool, dry location away from direct sunlight or heat sources is ideal. Additionally, you may consider using a padded storage bag or case to protect your polespear during transport and storage.

What should I do if I notice any signs of damage or wear on my polespear?

If you notice any signs of damage or wear on your polespear, such as cracks, missing pieces, or stretched-out bands, it’s important to address these issues immediately. Continuing to use a damaged polespear can not only be dangerous, but it can also cause further damage to the spear and potentially render it unusable. Depending on the extent of the damage, you may need to replace specific components or the entire polespear.

Is it necessary to lubricate my polespear components?

While not always necessary, lubricating certain components of your polespear can help to extend their lifespan and prevent damage. For example, you may choose to apply a small amount of silicone lubricant to the O-rings of your polespear’s bands, or to the shaft’s threaded inserts. However, be careful not to over-lubricate, as this can attract dirt and debris and cause more harm than good.